Definition: Two component, without solvent polyhurethane based sticky

Application Area : Thomsit R 710 in industrial caoutchouc covering, isolation covering and also concrete, glass, metal, ceramic, strafor, wooden, contraplaque is applied PVC floor covering should not be stick before testing. Indoor and outdoor can be used.

Product Advantages :

Technical Properties :

R 710 A                                             R 710 B
Colour:                                             Beige                                              Dark Brown
Density:                                           1.45 kg/lt                                        1.2 kg/lt
Mixture rate:                                    Weight 5 section                            Weight 1 Section
Volume 3.4 section                          Voulme 1 section
Mixture rate time:                           15 - 30 minute ( 20°C )
Hardness time:                                after 5 hours
Mechanical endurence:                   after 8 hours
Chemical endurance:                      after 7 days
Durind Storage and Transport
Heat Resistance:                             -20°C ile +50°C
Shelf existance:                               12 Month
Expenditure:                                    300 - 1200 gr/m²

Application:  The application floor should be clean, dry pressured and without cracks. The heating should be cut in 10 days ago from the application and should be shut down during application. After 72 hours can be worked the system again. Thomsit R 710 is strengthened after 5 to 8 hours reaches to the mechanical endurance. It is available to use brush while spreading sticky. To stick both two surface is available.

Attention: After using strengthened should be tightly close the cop. During the application should be used glove and glasses. Keep away from children. If any contact with your eyes skin or eyes wash throughly and go to doctor.