| THOMSIT P 625 Polyurethane based parquet sticky |
 |
Definition: Two component sticky without solvent polyurethane based.
Application Area : For all kind of parquet and wooden covering without solvent with two component reaction strengthened sticky Thomsit P 625 is ready parquet and laminate covering used in sticking on surfaces.
Product Advantages :
- All kind of parquet and wooden covering sticky
- Provides bending sticky
- Gives high performance in first and last sticky
- The covering is avaliable in under heating systems.
Technical Properties :
Component A Component B
Colour: Beige Dark Brown
Denstiy: 1.55 g/cm³ 1.2 g/cm³
Mixture Rate: 6 kg 1 kg
Hardening : 30 - 45 dakika
Open Time: Yaklaşık 60 dakika
Fire Heating: > 100°C
Shelf Existance: 12 Months
Expenditure: 800 - 2000 g/cm²
Application: The sticky surface should be clean, dry, without crack and dust. The rough on surface should be smoothed with Thomsit grading plaster. In underheating system should be cut in heating before 10 days. The system can be worked after 72 hours from the application. The product is in a diffrent package with two components. Strengentened component is put in resine and mix till the homogenous colour found. Minimum mixture time is 5 minutes. The product become hardtime in 20 C degree temperature 30 to 45 minutes. The begining of becoming hard and the strengthened is depend on the heating of floor and area.
Attention : Do not mix Thomsit P 625 with another brand product. It is dangerous to burn the products residue. During burning occurs a harmful gases to human health because of the strengthened B component. Get away the products from children can reach. Close the caps. After using strengthened should be the cop tightly close. It is adviced to use during application glove and glasses. If any contact with your skin or eyes wash throughly and go to doctor.
