HENKEL - Ceresit
|
| NO WATER "WHITE LIQUID PLACTIC COVERING" |
 |
Definition: One component acyrlic basel syntetic covering and isolation product.
Application Area: This product is used in wide surface with many union points, flat and dip roof, balcony and terrace water isolation, building front and roof pipe. It should be also used in wood, metal concrete and ethernite surfaces.
Product Advantages:
- Ready to use
- No Solvent
- Durable on VV filter
- Elastic
- No Effection from old
- Easy to apply
- It could be thinned with water
- It breaths
- It can be painted on.
Technical Properties :
- Denstiy : 1.45 g\ cm3
- Heat resistance : 25 C degree to 70 C degree
- Application Heat : 5 C degree in dry weather
- Pulling : 20 kg/ cm3
- Flexibility : % 500
- Surface Drying Time : 4-5 hours ( Normal Weather Conditions )
- Shelf existance : 1 year in room temperature
- Colour : White ( other colurs with order )
Consumption : 1 – 1.5 kg/ m² for 1 mm
Application: The surface should be dry, clean, and to be dip for the water reflection. Deep cracks should be filled with cresit acyrlic mastic. The surface should be ready to cover with Cresit primer. Before using it should be good mixed. For the right and suitable surface when it is dried should be minimum 1 mm thickness uniform film thickness use. For the long lasting time to 24 hours a few layer diagonally to each other. After 24 hours application should be protect from rain and frost. The tools can be cleaned by water after the application.
