HENKEL - Ceresit
|
| LIQUID RUBBER'S SPECİAL LIQUID CAOUTCHOUC |
 |
Definition: Protector, untransfered water , without bitumen make a smooth film, include no bitumen, sticks on moisture and wet surface. And also it can be apply under the rain.
Applicaition areas: It can be apply in old and new terraces, roof and vault, roof pipe and brooks, wood, metal boots, concrete store, liquid tanks, pools isolation. It can be also apply over pvc all kind of wood, metal, concrete, ethernity, asphalt, bitumen.
Product Advantages:
- Sticks all moisture and wet products
- No water can go inside during the application
- It accept vast without cracks and elactic
- Long lasting
- Apply under the rain and cold
- Without any combination and patches provides protection
- It is so sensitive some kind of concantrate based and acids, solvent. But on the other hand it is strong against hydrocloric acids, concantrate ammoniac and sodium clorate, alcohol, silver nitrate and glycerine.
Technical Properties :
- Denstiy : 1.2 gr\ m²
- Heat resistance : -25 C degree to 80 C degree ( it does not burn 100 C degree to 130 C degree heat. Only losing elestic and seen in light colours can turn yellow)
- Application Heat : 5 C degree to 30 C degree
- Surface Drying Time : in open area at least 24 hours – in closed area 72 hours
- Cold endurence : there is no change in – 25 C degree after 24 hours from application. Makes no crack.
- Fire resistance : M 2 class
- Film thickness : 0,3 mm
- Shelf existance : in closed package at least one year
- Colour : Grey
Expenditure : ( for 3 layer ) 1- 1,8 kg/ m² reinforced concrete
0,7 – 1,2 kg/ m² metal etc.
Application: Surfaces should be clean. Drainage should be done. The cracks over the surfaces should be close with ceresit PU mastic 24 – 28 hours before the application. The oils and the damaged metal surfaces should be clean. Ceresit liquid rubbers applies diagonally with the help of brush and roller every 36 hours. The tools should be clean after the application immediatelly with gas oil or acetone.
Attention: Contains burning solvent. Do not smoke during the application and while openning the box. During the application should be in airy condition. After the ceresit liquid rubbers over the application should not be walk. If you have to walk you should spread protect alum.
