APPLICATION |
| Laminate parquet application: |
They are with floating systems applied products to stick the board only from small pipes of lamps or put on clic systems. The boards do not sticks on floor. Should be given 10 -15 mm spaces between the wall over 60m² places, the application made by seperating.
Application: The first board geared side is put against to the wall. The distance between board and wall should be minimum10mm. Without sticky the first 3 row is setting. The last board turned down and give a distance with wall the cut place is pointed. Every row is started rest of the first piece. Close two boards should be min. 40 cm distance. If the sticky will use you should be careful the species of product and the rest of the sticky. Should be cleaned over parquet surface before drying after the finish of the whole appliying spaces of the wall bottom is used to ready the right colour of skirting-board and close with the profiles.
Laminate parquet cleaning&caring:
- Put doormat in dirty places ( for example, corridor, or entrence )
- Protect your covering against scratching and crushing. Under action furniture should be stick felt, if not the guarentee finishes because of damage. Use only soft wheels office chair.
- Not sticky surfaces clean with sweeping-brush
- Clean the footprints and dirts with with good tighted cloth, should be protect from water over it.
- Do not clean with polishing, rubbing material and wax
- Clean the hard dirty with cleaning products or acetone.
- For the proper cleaning use a notr cleaning material or normal laminate care material.
- Do not use the combine care material for the use of parquet mushroom etc.
- The dust can be cleaned by little moistured cloth. Do not clean with waterily doormats.
- Never use asidic cleaning material, polish or emergy.
