Definition : Include inorganic and organic special dispersion based conductive sticky.

Application Area : Thomsit K 112 ready to use dispersion based a sticky with thomsit R 762 primer for conductive Pvc floor covering. DIN norms 16860 DIN 51953 and DIN 53276.

Product Advantages :

Technical Properties :

 Application :  Floor must be strong , clean, no crack endurance pressure according to DIN 18365 norm. It adviced 2 mm thickness self-leveling Thomsit DD, Thomsit DX, for asphalt surfaces. It must be remove carpet, linoleum, homogenous, hetorogenous, pvc all covering on floor. It must be used Thomsit R 762 conductive primer according to DIN standarts. Copper application although old method every 30 m² one metres copper band. System must be ground-connection. Generally applied by electric-worker. If only anti-static application not used conductive primer. It must be used thomsit non-static K comb. The adviced sticky method for absorbent surfaces. You should be lay on for good spread and you should be start floor covering operation after 10 – 20 minutes. The adviced contact sticky method for not porous surfaces. You should be lay on sticky and wait until film yellow colour, feel the dry ( room temperature approximately 45- 60 minutes ) Thomsit non-stick R comb : Comb must be cleaned one time by wet cloth. If sticky crusty not use it. System must be worked 28 days. Before the application temperature must be 18 C degree to 15 C degree in winter. After must be done everyday rised 5 C degree.