INVISIBLE - Yıldız Yapı Sistemleri

Definition: Untransfered water but water steam transfered, moisture protector on no film surface.

Applicaition areas : It is used into provide the unpainted natural surfaces like; stone, bricks, cement, heated soil etc. to untransfered water.It is apply in building front, brick roofs, sculpture and monument.It protects the natural seems and surfaces.And the effect of water push, it can be wash byself.Cotto etc. looks like a natural covering is used in the protection from the outside effects.

Untransfered water
Water steam and air transfered
It occurs no film layer on surface
It is not effect in oldness
It becomes the heat isolation of good higher
Ready to use liquid
It is furthered from the negative effect of wet, dirty, flowering, plants, frost etc.

Technical Properties :

concrete stone ethernity bricks

Before the application: %8.6 %6.3 %49.65 %7.7
After the application: %1.1 %0.16 %3.3 % 1.1
The rate of product breathing: 24 hours 7 days
Shelf existance : in closed package at least 1 year
Colour : transparent
Invisible unapplied concrete: 65 g/cm2
Invisible applied concrete: 52g/cm2-96g/cm2

Expenditure: according to surface properties 400 or 600g/m2

Application tools: roller, brush, airgun, spraygun

Application: The space filling should be clean, dry and cleaned from oil and dust. If there is any filling materials should be good cleaned. The surfaces should be clean, dry and unpainted.

Attention: apply between 5 to 50 C degree, ıt contains burned element.Do not smoke during the application, the tools should be cleaned with oilgas and turpentine.