Definition: Cement based, thinned layer fiance and ceramic cover plaster.

Applicaition areas :  It is used in ceramic, fiance, mosaic covering; perpendicular and horizantal minerallen based surfaces stick. It can be used in wet surfaces like kitchen, bath etc. It is advised to apply with Ceresit CC83. In old covering, painted surfaces, wood, cement andihirite plaster and other critical surfaces.

Product Advantages:

Technical Properties :

• Denstiy : 1.43 kg / lt
• Application time : approximately 2 hours
• Application heat : 5 C to 30 C degree
• Open time : 15 minutes
• Seam filling : end of 48 hours
• Sticky endurance : 28 day  EN 12004 ? 0.5 N / mm2
• Shelf existence : 12 months
• Mixture rate : 25 kg Ceresit fix : 6.5 lt water
                          25 kg Ceresir fix : 2 lt Ceresit CC83 4.5 lt water
  

Expenditure :

Application: The surface should be healthy and carrier. Should get rid of dust and oil. Before the 24 hours from the application should be ready the repairs till the 20mm with repair plaster Ceresit CT 20.The wall sucked minerallen based surfaces should be moistured. Ceresit fix is put in clean water if mixture.After 5 minute rested applies with geared brush on surface.

Attention : Because of the product cement based gives alcali reaction with water.Any contact with eyes or skin go to doctor after washing.