• The applied surfaces moisture rate should be really under %5 percent. For this reason before every application should be looked at first the moisture of place with the high calibration hygrometer. After this all surface should be roughed after schmidt with test if there is a thick covering done, the chosen rotogiger or blastrac machine or covering thickness is little , the application place should rub with emery. Both of two application before the whole surface sweeped then with vacuum – machine get rid of dust.
  
  
• All cracks should be open in the shape of V and should be repair with Araldite Epoxy Repeair mortor D. Under the epoxy covering should not be stay thin layer. All surface rough and segragations should be the same made. After this application according to the speciality of covering and thickness should be lined , if need resine application , need resined and apply last layer. It is diffrent for every covering product usage, using methode and thickness diffrence. The product is chosen depend on your pocket the place speciality, floor roughness and the actioned or cool traffic. The same looking can be made in a diffrent thickness or traffic.

EPOXY CARE:

• Epoxy covering is lasting against the positive way of chemicals effect and moisture but in negative way of moisture coming not lasting so the covering place should be protect against the moisture.
• Every product in nature is scratches epoxy is hard to be scratch but it can be. According to this like the other covering species has should be polish apply on epoxy surface and depend on traffic the covering regenerationed long-lasting
• Epoxy can turn yellow under VV filter when it is directly contract with sun light should be protect in open place with cloric or transparent polyreten last year product.
• Epoxy covering should be properly made. In this cleaning work for this reason produced. Product usage the heels, transpallette, forklift wheels do not give