HENKEL - Ceresit
|
| CU 25 READY TO USE FIANCE STICKY |
 |
Definition: Ready dispansion based fiance, isolation and decor plaques sticky.
Applicaition areas: It is used to stick fiance, ceramic, mozaic, decor plaque, heat and water isolation plaque. It is also applied in all inside places ceiling and walls, bathroom and kitchen like a wet volumes in old coverings. You can use in cement, ethernit, plaster, sandvwiches board, wood and painted surfaces and straphor.
Product Advantages:
- Ready to use
- Against to moisture
- It has a high sticky speciality
- Elestic
- Easy and fast apply
Technical Properties :
- Density : 1.5 gr / cm3
- Application heat : 5 C to 30 C degree
- Open time : approximately 25 minutes
- Heat endurance: -20 C to 70 C degree
- Sticky endurance : dry ? 1 N/ mm2 wet ? 0.5 N/mm2
- Shelf existence : 12 months
- Colour : white
- Mechanic effect endurance : after 48 hours
Expenditure :
Comb Tooth depth (mm) |
Consumption (kg/m²) |
3 |
1.7 |
4 |
2 |
6 |
2.7 |
4 |
1.2 |
Application: The surface should be clean flat and away from dust. On the right made floor should be done with spatula by ceresit CU 25 in a flat way and then with the help of geared brush give a waved lines. And so we have a equal layer. The fiances and plugs press over sticky. You should used the triangle geared brush to stick to flat backed fiances.
Attention: To dry ceresit CU 25 should be the sticky metarial or floor suckfull. Otherwise; for example you should bear in mind that the dry time will be longer if you stick the old flat baked fiances
