HENKEL - Ceresit
|
| CT 10 WATER ISOLATION PRODUCT |
 |
Definition: It is used to seams to and coverings impregnated in balcony and terraces without solvent transparent in impregnate product.
Applicaition areas : It is ideal for terrace and balcony isolation. It is used in fiance, concrete, alum and natural Stone impregnate.It provides pored fiance, seam and till 0.2mm cracks to win water pushed speciality.It also provides in bath and shower fiance, seams isolation in transparent.It can be both sucking and non-sucking flooring used.
Product Advantages:
- Isolate seams
- Protects against frost
- Dry – fast (2-6 hours)
- Breaths
- Protects pored coverings
- Available for indoors and outdoors
- Do not occur shining and opaque
- Uncultivated and cork hindern
Technical Properties :
- Denstiy : approximately 1.0g/cm3
- Chemical structure : silicon emulsion
- Application Heat : 5 C degree to 25 C degree
- Rain Endurance : 2-6 hours later
- Shelf existance : against frost protected 1 year
- Colour : milky white, when dried transparent
- Water steam resistence: 0, not measured
- Taking water coefficient : ?0.5kg/m2
- Final impregnate : after 14 days(1 or 2 yeared impregnate)
Expenditure : 200g/m2
Application: Ceresit CT10 can be used all clean, dry and little moistured surfaces.Should be repaired the uncarried and damaged parts and also cleaned. The swelling parts should be in a mechanical way clean.The unapplied areas should be protected.The floor should be protected against moisture coming from the opposite side.Because given a little shining should not be used in outside part impregnate.Before using shake the package well.Spread it over surface with a plastic roller.For seams apply with brush, after 5 minute.Effect the rest of seam should be rubbed.One time application is enough.
