Definition: Bitumen cover for the inside and outside place isolation with aduterated caoutchouc high elastics. 

Applicaition areas :  It is used in concrete ,brick surfaces ,floor moisture ,surface and underground waters ,water isolation.
It should be also in seamless, cracks covering and in repair of bitumen covering the dip minimum %5 in flat roofs. It is not available in pools or water tank places. It should be adviced only for the positive isolation. 

Product Advantages:

Technical Properties:

Expenditure :  ( for 3 layer )   1.5 kg/m²

Application: Ceresit CP 42 can be used only in flat, strong, carriable, clean and dry ( or a few moisture ) minarellen, and old all bitumen surfaces. All edges and corners should be rounded and about 4 cm with ceresit CT 20 repair mortar sholud be bevel done. The rough surfaces should be levelled and seam should be filled. You must not be done directly under the sunlight. Ceresit CP 42 can be spreaded to surface with a thining 1: 1 rate of water with the help of brush. For isolation advised to apply in double layer. In machine application should be used the right airless. The dry time is approximately 4 to 24 hours. The new and fresh application should be protected after 7 days from rain. If the surface become the dirty, the product can be cleaned by pure water. The application tools can be also cleaned by water.

Attention: The product should be only in dry condition and 5 to 30 degree in % 50 weather moisture apply. The application diffrences can be made diffrence in dry time. The isolation business should be protected against the follwing machanical application.