HENKEL - Ceresit |
| CN 69 SELF LEVELING |
 |
Definition: With cement based syntethic floor rectification plaster
Applicaition areas : You can use before the pvc, carpet, ceramic and fiance covering and to make the roof surfaces.Every thickness dry quickly.3- 15 mm thickness can be in one application.It sticks perfectly on floor.
Technical Properties :
- Available over walking : 8 hours later
- Application heat : 5 C to 30 C degree
- Mixture rate : 25 kg ceresit NC 69 : 5.120 lt water
- Working time : 30 minutes
- Shelf existance : 12 months in dry and cool conditions
- Pressure endurance (end of 28days) : ? 15 N/ mm2
- Flexibilty endurance : end of 28 days ? 5.0 N / mm2
- Fiance covering : end of 48 hours
- Acyrilic based sticky with covering : end of 72 hours
- Solvent based sticky covering : end of 7 days
Application heat all technical data put in order 20 C degree heat and % 60 humadity conditions.
Expenditure : 1.5 kg / mm2 (for 1 mm)
Application : The floors should be strong, clean, no crack and if there is no oil etc.Repairing should be done with ceresit CT 20 before 24 hours.The sucked surfaces with Thomsit R777 and unsucked with Thomsit R 760 should be lined.Ceresit CN 69 can be spread in one application 3- 15 mm thickness.25 kg Ceresit CN69 is put 5,120 lt water in and mixed until the lumps disappear.(400-800 per/min)After 5 minute resting in box, spread it over surface.Every time you should make periodical in 30 minute mixture.If you will make its application with the help of machine, you should use spiral pump and you should not give over 25 minute pause.
Application tools: Available good trowel, spiral pump plaster machine.
Attention : If you put more water they advised it should be seen cendimation and air bubble. If any contact with your skin wash througly.If any eyes contact go to doctor.
