HENKEL - Ceresit
|
| CM 17 FLEXIBLE - CERAMIC- FIANCE AND NATUREL STONE STICKY PLASTER |
 |
Definition: Inside and outside places, one component, syntethic, cement based elastic sticky plaster.
Applicaition areas: It is used in minaral based surfaces, spacially in a huge measure of fiance, ceramic, porcelain, granite and naturel stone covering sticky. It is used also in horizantal and perpendicular inside and outside places. It can be used in under heating places, balcony, terrace and cement structure elements sticky.
Product Advantages:
- Long open time
- High elactic
- No sleeping system
Technical Properties :
- Densty : 1.29 kg / lt
- Application time : 2 hours
- Application heat : 5 C to 30 C degree
- Open time : ? 20 minutes
- Seam filling : end of 48 hours
- Sticky endurance : 1.50 N/ mm2 ( 28 days )
- Shelf existence : 12 months
- Mixture rate : 25 kg Ceresit CM 17 : 8.75- 9.25 lt water
- Sliding : ? 0.5 mm
- Heat endurance : -30 C to 70 C degree
- Resting time. 5 min.
Expenditure :
Comb Tooth depth ( mm) |
Consumption (kg/m²) |
4 |
1.4 |
6 |
2.1 |
8 |
2.7 |
10 |
3.0 |
Application: The surface should be clean, strong and without oil and dust. It can be apply in dry or moisture surfaces. The surface repair should be done before 24 hours from application with ceresit CT 20 plaster. All sucked surfaces, cement, plaster should be lined before application. The lining is not necessery for the extrude and expend polystrene board, fiance and natural tone covering surfaces. The painted surfaces should be get rid off dust and rub down with emery. If you used clean and cold water use should put ceresit CM 17. The mixture should wait 5 minute and then with the help of geared brush apply to the surface. The fiances should be sticked.
Attention : The product contains cement and so when you put water in it gives alcali reaction. If any contact with your eyes or skin go to doctor.
