HENKEL - Ceresit
|
| CM 11 CERAMIC AND FIANCE STICK PLASTER |
 |
Definition: Cement based thin layer fiance and ceramic covering plaster.
Applicaition areas : It is used the stick ceramic, fiance, mozaic covoring indoor and outdoor; in horizantal and perpendicular minarel based surfaces. You can also in swimming pool, water tank, bathroom etc. wet volume used. In outdoor apply ; old covering, the painted surfaces, unhitrite plaster, soft cement, wood and plaster board elastic and to become higher the aderance of surface with ceresit CC 83 eleastic emulsion based.
Product Advantages:
- High stability
- Strong against water and frost
- It provides sticky thickness between 2-10 mm
- Comfort using, easy mixture
Technical Properties :
- Densty : 1.43 kg / lt
- Application time : approximately 2 hours
- Application heat : 5 C to 30 C degree
- Open time : 20 minutes
- Seam filling : end of 48 hours
- Sticky endurance : 28 day EN 12004 ? 0.5 N / mm2
- Shelf existence : 12 months
- Mixture rate : 25 kg Ceresit CM 11 : 6.5 lt water
25 kg Ceresir CM 11 : 2 lt Ceresit CC83 4.5 lt water
Expenditure :
Comb Tooth depth ( mm) |
Consumption (kg/m²) |
3 |
1.7 |
4 |
2.0 |
6 |
2.7 |
8 |
3.3 |
Application: The surface should be strong and carrier. Away from dust, oil and dirty. It should be lined indoor and outdoor; anhidrite plaster, wood, plaster board and soft cement with Thomsit R 777. All mineral based sucked surface should moistured before the application. Ceresit CM 11 is put if you mix with the celan water. After 5 minute rest it is applied with the right geared brush on surface.
Attention : Because of the product cement based gives alcali reaction with water.Any contact with eyes or skin go to doctor after washing.
