HENKEL - Ceresit |
| BITUMEN MASTIC |
 |
Definition: Plasto elastic bitumen with solvent.
Applicaition areas: It is used in bricks, concrete, lead, ceramic isolation board and main plastic seams, roof air condition cannals, drenaige pipe system, car and caravan montage, repair stick and filling. It is also in wooden boats and boat isolation products used.
Product Advantages:
- Ready tu use
- Thixotropy
- Perfect stick in moisture surfaces
- No asbestos
- Protection against moisture and corrosion
- UV filter
- Fast curing
Technical Properties :
- Densty(ISO 1183) : 1.38 g / ml
- Heat endurance : -35 C to 110 C degree
- Cure system : notr physical protection
- Crust time : 30 minutes
- Cure fast(23 C degree % 65 moisture) : 0.5 -1 mm / day
- Application heat : 3 C to 35 C degree
- Shelf existance : 9 months in cool and dry places in packaged
- Color : black
Expenditure : 450 g / cm2
Application : You should get rid of from oil and dust before the application .Application in moistured surfaces, the aderans should be tested because of the surface differences.For the perfect aderans the cannula should be close to surface(max.3 mm)
Attention: It does not used for lining. Over it can not be painted by solvent based paint. It can be used with extrude polystrene. Ceresit bitumen mastic should be only used by the surface application. It should not apply directly on the polystrene board. The contact with minerallen, oil can be smoothed the mastic. You should be airy condition inside because of the aromatic hydrocarbon.
